Crestron Fabric Library

The 3% default for oceanfront glass, on the Phifer cardTier 2

SheerWeave 2410 is the 3% weave of the Phifer 2500 family, and 3% is where most South Florida glass ends up: enough weave to hold a bright afternoon on the ocean, enough opening to keep the water in view. Crestron lists it in the Heritage Collection at Tier 2, 124 inches wide in every colourway, with a visible transmittance of 3% to 17% depending on the colour. We cut the same Phifer weave in our own Fort Lauderdale workroom for Lutron and Somfy shades, so we know how it hangs, how it rolls and what it does at four in the afternoon before it goes into the Crestron Design Tool as a finished shade.

The card is eleven colourways on five bases, and at 3% the spread between them is wide. Charcoal transmits 3% of the solar energy and absorbs 94% at the glass, the clearest view on the page and the warmest fabric; Brilliant/White transmits 18% and reflects 70%, the coolest and the brightest. Between them Oyster reflects 64%, Beige 48% and Pearl Gray 31% with 6% transmitted, and the charcoal mixes keep the view of Charcoal while giving a little back, Charcoal/Alpaca reflecting 20% and Charcoal/Grey 9%. The full optical and fire data for the weave is on our Phifer SheerWeave 2500 series page.

Woven by Phifer; the mill's full data is on our Phifer SheerWeave 2500 series page.

Best Use & Limits

What SheerWeave 2410 does on your glass, and what it does not

Best use

The ocean front, the south glass, the living spaces of a condo from Miami Beach to Boca Raton: 3% is the openness we put down first and move off only with a reason. Charcoal/Chestnut or Charcoal/Grey on a slider wall that frames the water, Oyster/Pearl Grey or Beige/Pearl Gray in a pale room where the glass faces the morning. For a media room or a west office, 2500; for shaded north glass, 2390 or 2360.

Privacy

By day the weave covers the room from the street well enough, most in the pale colourways that bounce daylight back and least in Charcoal, whose clear view out is a clear view in for anyone at the glass. By night, none in any colour: with the lights on, a 3% screen is a lit window from outside. A bedroom or ground-floor bathroom takes a second, light-filtering or blackout layer on a dual roller.

Glare control

At the dark end of the card the room goes soft and a television stays watchable all afternoon; at the pale end the view is crisp and a screen facing the window still washes out. Charcoal/Chestnut at 3% of solar energy transmitted is the pick where glare is the complaint; Oyster/Beige at 11% is the pale colourway that behaves best. A low sun square in the window gets through any of them.

Limitations

It darkens nothing, it gives no privacy after dark, and on a hard west wall it leaves too much of the afternoon in the room. Beyond the roll width a shade is railroaded, and one taller than that as well needs a seam, placed on a mullion. Charcoal/Grey holds 88% of the solar energy at the glass; Beige/Pearl Gray at 54% absorbed is the middle road. For sleep, a blackout shade behind it.

Basketweave

SheerWeave 2410 colourways

11 colours. Openness 3%; up to 124 in wide; Crestron Tier 2; can be railroaded; fire retardant; woven by Phifer.

OpacityBasketweave
Openness factor3%
Crestron price tierTier 2
CollectionHeritage
Woven byPhifer
Usable roll width124 in
Solar transmittance (Ts)3% to 18%
Dual sidedNo
RailroadingYes
SeamableYes
CompositionPVC Coated Fiberglass - 35% Fiberglass, 65% Vinyl / PVC Coated Fiberglass - 37% Fiberglass, 63% Vinyl
Visible transmittance (Tv)3% to 17%
Ratings and certificationsFire retardant, GREENGUARD certified, lead free, mould and bacteria resistant, certified environmentally safe
Hembar optionsOpen, Sealed, Exposed
CleaningSoft damp cloth
Colourways11 (11 colours)

Composition, ratings, certifications, hembar options and cleaning are from Crestron's Fabric Information Guide, revision 3.23.26.

Colourways

Specifications

Every SheerWeave 2410 colourway, with Crestron's published figures

SwatchColourCrestron SKUOpacityOpennessTierTsRsAsTvWidthDual sidedRailroad
BeigeCSF-P2K04-03Basketweave3%Tier 210%48%42%7%124 inNoYes
Beige/Pearl GrayCSF-P2K05-03Basketweave3%Tier 27%39%54%5%124 inNoYes
Brilliant/WhiteCSF-P84-03Basketweave3%Tier 218%70%12%17%124 inNoYes
CharcoalCSF-P2K07-03Basketweave3%Tier 23%3%94%3%124 inNoYes
Charcoal/AlpacaCSF-P2K10-03Basketweave3%Tier 24%20%76%5%124 inNoYes
Charcoal/ChestnutCSF-P2K09-03Basketweave3%Tier 23%6%91%3%124 inNoYes
Charcoal/GreyCSF-P2K08-03Basketweave3%Tier 23%9%88%3%124 inNoYes
OysterCSF-P2K01-03Basketweave3%Tier 217%64%19%12%124 inNoYes
Oyster/BeigeCSF-P2K02-03Basketweave3%Tier 211%55%34%8%124 inNoYes
Oyster/Pearl GreyCSF-P2K03-03Basketweave3%Tier 29%44%47%7%124 inNoYes
Pearl GrayCSF-P2K06-03Basketweave3%Tier 26%31%63%5%124 inNoYes

Ts = solar energy transmitted, Rs = solar energy reflected, As = solar energy absorbed and Tv = visible light transmitted, in percent, as Crestron publishes them in its fabric shop and its Fabric Information Guide (revision 3.23.26) for each colourway; Ts, Rs and As add up to 100. Openness is Crestron's figure; width is the usable roll width. We bring samples of the colours you shortlist to the consultation.

What It Costs

What a Crestron shade in SheerWeave 2410 costs

Crestron places this fabric in price Tier 2. Its budgetary guide of June 2022 lists a motorized 5 Series roller shade in a Tier 2 fabric at $1,000 for 3 ft x 5 ft, $1,300 for 5 ft x 10 ft and $1,600 for 10 ft x 10 ft, MSRP, motor included, before options, control, wiring and installation.

Crestron Shades Budgetary Estimation Guide, June 2022: one motorized 5 Series roller shade, motor included, MSRP in US dollars
Shade sizeTier 1Tier 2Tier 3Tier 4
3 ft wide x 5 ft high$900$1,000$1,200$1,400
5 ft wide x 10 ft high$1,100$1,300$1,600$2,200
10 ft wide x 10 ft high$1,400$1,600$2,000$3,200

Options in the same guide: fascia $20 per ft; top and back cover $20 per ft; pocket $50 per ft; dual shade (two fabrics, one bracket) double the single-shade figure. The guide names example fabrics per tier: Tier 1: Bella, Mika, Merinda, Nava; Tier 2: E Screen, SheerWeave 2500, 2700 and 7500, Perla, Dilanna; Tier 3: SheerWeave 7000, Rachel, Nohea, Cosima; Tier 4: Flocke, Vizela, Harika; a few have changed tier since, and every fabric page gives the tier the Crestron fabric shop lists today. The guide excludes control processors, keypads, interfaces, wiring, power supplies, programming and installation. Source (PDF).

Figures are Crestron's own budgetary MSRP guide of June 2022 for one motorized 5 Series roller shade, motor included, before options. They exclude the control system, wiring, power, programming and installation, and Crestron may have changed them since. We quote every project at the measure.

South Florida

Where SheerWeave 2410 works here

2410 is the weave we specify on the ocean side from Sunny Isles Beach to Hillsboro Beach and on the south glass of a Boca Raton golf-course house: living rooms, dining rooms, a primary bedroom by day with a blackout behind it. Charcoal or Charcoal/Grey when the client wants the water and does not mind the fabric warming; Oyster or Beige/Pearl Gray when the room is pale and the heat matters more than clarity. A 14-foot slider wall takes the fabric railroaded on a QMT5 motor.

SheerWeave 2410 is the 3% step of the Phifer card shared with 2360, 2390 and 2500; SheerWeave 2703 is the dual-sided twill at the same 3%, and E Screen, M Screen, SheerWeave 4600 and SheerWeave 8000 are the other 3% basketweaves in the Crestron library.

Good to Know

SheerWeave 2410: frequently asked

Which 2410 colourway for a living room on the ocean?

It depends on what the room is for. Where the view is the reason the client bought the unit, Charcoal or Charcoal/Chestnut: dark yarn reads the water most clearly and takes the glare down furthest, at the cost of absorbing most of the solar energy at the glass. Where the room is white and the glass faces south-east, Oyster or Oyster/Beige reflects more of that energy and hazes the view a little. We hang both against the same window at the consultation, at the hour the sun is worst.

SheerWeave 2410 or 2703: which 3% weave?

Same mill, width, tier and 3%; what differs is the construction, the card and the hembar. SheerWeave 2703 is the dual-sided twill: it reads the same from both sides, its card is Charcoal and Oyster with their mixes, and Crestron offers it with all four hembars including the Designer Half-Wrap. 2410 is the plain basketweave with Beige, Brilliant/White and Pearl Gray as well, on the Open Pocket, Sealed Pocket and Exposed Blackout hembars. Choose 2703 when the back of the shade shows; otherwise choose by the card.

What does 2410 offer that M Screen at 3% does not?

Four inches of width and a different card. M Screen is the Mermet basketweave Crestron stocks at 3% and 5%, 120 inches wide in thirteen colours; 2410 is 124 inches in the Phifer card of Beige, Brilliant/White, Charcoal, Oyster and Pearl Gray and their mixes. Both are Tier 2 fiberglass and vinyl in the Heritage Collection. When a wall is between 120 and 124 inches the extra width saves a railroad; otherwise it comes down to which card carries the colour the room wants.

What does a Crestron shade in SheerWeave 2410 cost?

Crestron places this fabric in price Tier 2. Its budgetary guide of June 2022 lists a motorized 5 Series roller shade in a Tier 2 fabric at $1,000 for 3 ft x 5 ft, $1,300 for 5 ft x 10 ft and $1,600 for 10 ft x 10 ft, MSRP, motor included, before options, control, wiring and installation. Options, the control system, wiring and installation are on top; we quote the finished shade at the measure.

How wide can a Crestron shade in SheerWeave 2410 be?

Crestron lists a usable roll width of 124 inches for SheerWeave 2410; the fabric can be railroaded, turned 90 degrees on the roll, so one shade can run wider than the roll as long as it is no taller than the roll width, and where it is taller Crestron joins two widths with a horizontal seam, which we line up with a mullion or a transom. We confirm the limit for the chosen hardware when we measure.

Is Crestron SheerWeave 2410 the same fabric as the mill's?

Crestron buys SheerWeave 2410 from Phifer and lists it under its own SKUs and price tier. The weave is the one on our Phifer SheerWeave 2500 series page, where the mill's full optical and fire data lives; Crestron's page here shows the colourways and openness Crestron actually stocks for its shades.

Can I see SheerWeave 2410 samples before ordering?

Yes. We bring samples of the colours you shortlist to the in-home consultation, so you judge them against your own glass, and both showrooms, 4539 Powerline Rd in Fort Lauderdale (by appointment) and 500 South Pointe Dr #150 in Miami Beach, have motorized shades running.

Where We Install

Crestron SheerWeave 2410 shades in Fort Lauderdale, Miami, Boca Raton & Palm Beach

We specify SheerWeave 2410 on Crestron Digital QMT motors and hardware for any project from Miami to Palm Beach; Crestron builds each shade to order from our measurements, and we install it with our own team and commission it with your integrator. Both showrooms, 4539 Powerline Rd in Fort Lauderdale (by appointment) and 500 South Pointe Dr #150 in Miami Beach, have motorized shades running so you can see the fabric in motion.

See SheerWeave 2410 in your own light

Book a complimentary in-home consultation. Shortlist the colours you like and we bring samples, demo motors, and honest answers about openness, colour and what your windows actually need.

Call 954-881-9331Book a Free Consultation